I’ve been adventure riding for over 15 years, and I’ve spent quite a bit of time with the original TKC 80 tires; from my home in Calgary to Inuvik in Canada’s Northwest Territories, from Calgary to Newfoundland via the Trans Labrador Highway, I’ve toured several of the Backcountry Discovery Routes, Route 66 and the entire length of the Pacific Coast Highway. I’ve gone through quite a few brands of adventure tires over the 15 years, but the TKCs were always the favourite, both on- and off-road. So, when given the opportunity to try out the new Second Generation TKC 80 tires, saying I was excited is an understatement.
THE TECHNICAL DETAILS
The new TKC 80 Gen 2 tires were four years in development, resulting in a 17 percent larger footprint in the centre of the tire for better high-speed stability, more grip in all conditions and longer life. For off-road riding, the new knobby design means more traction, with staggered symmetrical shoulder blocks offering more consistent side grip. The design of the actual knobbies has changed as well, with each block having a steep edge and a ramped edge. This new design offers improved grip during braking off-road, and higher block stiffness for more precision on-road.

Many design ideas were tested over the four years, with the goal of achieving the optimal grip for 50/50 tires. Various on-road and off-road compounds, several carcass designs and assorted tread patterns were all in play. The compound development was particularly challenging: off-road riding favours a softer compound and on-road riding requires a higher stiffness level to stop the tires from squirming.
After extensive testing, Continental decided that a refined bias-ply tire design achieved their performance goals better than a radial design. Moving belts around inside the tire carcass make the tire slightly softer in the sidewall area, which, when combined with the new asymmetric knobby design, results in more side grip while riding off-road. Maintaining the bias-ply design also allows the new TKC 80 Gen 2 tire to maintain the same iconic riding behaviour as the original TCK 80, and an improved bead structure provides better air tightness for consistent tire pressure and makes running tubeless tires much less of a concern.
The new knobby layout provides significantly less irregular tire wear, which was always an issue for the original TKC 80, particularly the front tire. Long time TKC 80 users are likely familiar with the “every second knobby on the front tire” disappearing act. The new knobby design also lowers the amount of road noise that is typical for a 50/50 tire.
Wet weather traction has improved significantly primarily due to new compounds and tread pattern.
THE TESTING
Our group of Canadian journalists arrived at Enduro Park Canada, an official BMW training facility located just outside Victoria, BC to meet our host Ryan Austin and his very capable staff. It had rained the day before we arrived, so we were warned that the Enduro Park Canada terrain may be treacherous.
We started off with some on-bike warm up exercises in a gravel parking lot, and even in the areas where the gravel had piled up the TKC 80 Gen 2 stuck to their intended path. After completing our warmup (which included some slalom elements and 180-degree confined space turns), we progressed into some follow-the-leader exercises. These took place in muddy, sandy, and steep(ish) areas inside the impressive training facility. Really more like a playground for off-road bikes.
After playing around in the dirt for the morning, we grabbed a bite to eat at Tim Hortons, and then started the on-road portion of the day. And both the bikes and the tires were very impressive. Ryan led us down some local scenic and twisty roads, several of which were still quite damp. Even with some spirited riding, the TKC 80 Gen 2s stayed firmly planted to the road. I unfortunately forgot my earplugs, so I got to witness in person how quiet the tires are. I’ve had some harder-compound tires on my bikes that hummed unbelievably loudly, but the TKC 80 Gen 2s remained quiet even at highway speeds.
A particularly telling moment was crossing several damp wood-deck bridges. Typically these bridges are slick, but even when crossing the bridges on a slight angle the tires stuck to the deck
The next day was primarily on-road, with a section of off-road riding that took us high up Mt Breton on some well-groomed (with the occasional puddle) forestry roads. Once again, the scenery was spectacular and it gave me a chance to truly appreciate how little drama there is when riding on the TKC 80 Gen 2s.

MY IMPRESSIONS
After testing the tires, I could not be more impressed. Above all, the TKC 80 Gen 2s have excellent traction both on- and off-road. Off-road, mud clears quickly, wet grip is tremendous and the tire is very predictable when letting go. In fact, considerable effort is required to make the tire let go, I had to load the front end and then get hard on the gas to spin the rear tire, most of the time I just accelerated away.
Off-road side grip is improved, mainly due to the new tread pattern, but also the updated compounds. This was noticeable during the training part of the testing; when riding side-hills I fully expected the bike to slide and was pleasantly surprised when it didn’t.
The new TKC 80 Gen 2 compounds maintain the excellent level of grip of the original TKC 80s on pavement, tire noise is minimal, and hopefully the new design allows the tires to last a little longer on the road (although Daniel Solórzano, the Continental Tire guru, makes no such claim).
The wet grip when riding on-road was astonishing; I crossed several wood-deck bridges that were still damp from the previous evening’s rain, and the bike didn’t even wiggle off line.
CONCLUSION
I’ve been using higher-milage tires for the past few years, but having ridden the new TKC 80 Gen 2 tire, I’ll be switching back to Continental. The confidence they inspire is astronomical. No twitches or wiggles even when I was cornering fairly hard.
Visit the Continental website for complete details of the all-new TKC 80 Gen 2 tires.











Discussion about this post